Flexim FLUXUS F721TE Heat and Cold Metering in any Environment

The Flexim FLUXUS F721TE is specially designed for heating and cooling Thermal Energy measurement, with all measurements - Flowmeter, Temperature, and BTU computer, contained in one device. Calculations are done in accordance with EN 1434 Thermal Energy meter standard and the F721TE measures the volumetric flow rate non-intrusively via its clamp-on ultrasonic transducers. Simultaneously, temperature probes monitor the temperatures at the supply and return lines of the heating or cooling system - either non-intrusively with clamp-on sensors or by use of insertion temperature probes. It can be equipped with two measurement channels to measure two pipes simultaneously and allow complete monitoring and accurate measurements. Fluid type: Water, water-glycol, typical heat transfer fluids Accuracy: Measurement uncertainty of the measuring system (volumetric flow rate): ±0.3 % of reading ±0,005 m/s (±0.02 ft/s)Measurement uncertainty at the measuring point (volumetric flow rate): ±1 % of reading ±0,005 m/s (±0.02 ft/s) Repeatability: 0.15 % of reading ±0,005 m/s (±0.02 ft/s) Flow Channels: up to 2 Range: Flow Velocity Range: 0,01…25 m/s (0.03 to 82 ft/s), depending on pipe diameter Certifications/Approvals: FM Class I /Div 2ATEX/IECEx Zone 2PESOKOSHA Power supply: 100-230VAC24VDC12VDC Pipe size: 6 to 6500 mm (0.24 to 255.9 inch) Pressure range: - Temperature range (media): -40 to +240°C (-40 to +464°F) Output: 4-20mA active/passive4-20mA HART active/passivepulse/frequency/binaryvoltage Input: Temperature4-20mA active/passivebinaryvoltage Communication Protocol: Modbus RTU/TCPBACnet MSTP/IPProfibus PAFoundation Fieldbus System configuration and installation: For more detailed Information please download the Technical Specifications