Rosemount™ CVU Conductivity Validation Unit

Achieve accurate, standard operating procedure documentation of high purity water quality with the Rosemount Analytical CVU Conductivity Validation Unit. Loop-calibrated to NIST traceable standards, this instrument helps meet validation requirements and exceeds USP2 accuracy requirements. This CVU is ideal for applications where calibrating a conductivity sensor against a standard solution is impractical and is a suitable tool for the pharmaceutical, semiconductor and utility industries. Dimensions: Width 19" (48.3 cm), Depth 16" (40.6 cm), Height 12" (30.5 cm) Weight: Case: Single sensor 21 lbs (9.5 kg) / Dual sensor 25 lbs (11.3 kg) Wires: 3 @ 16QWG Power: Ordering Code -01: 115/230 VAC ±15%, 50/60 Hz. 10W min. power input Input: One or two isolated sensor inputs Outputs: Two 4-20 mA or 0-20 mA isolated current outputs. Fully scalable. Max Load: 550 Ohm. Terminal Connections: Power connector (3-leads): 24-12 AWG wire size. Signal board terminal blocks: 26-16 AWG wire size. Current output connectors (2-leads): 24-16 AWG wire size